Navigate to:

Liquid Flow Restriction

I used a Swiftech MCP50X pump with a FrozenQ 400mL cylindrical reservoir. The pump was powered by a direct SATA connection to an EVGA 1300G2 PSU and was controlled by an Aquacomputer Aquaero 6 XT. There was a previously calibrated in-line flow meter and a Dwyer 490 Series 1 wet-wet manometer to measure the pressure drop of the component being tested. Every component was connected to the manometer by the way of 1/2″ x 3/4″ tubing, compression fittings, and two T-fittings. Lower is better here.

In case you are unable to view the chart above, here is a link to the online document: GTX 1080 Waterblocks

I have here some entries that are GPU block, and GPU block + backplate. This was to merely distinguish each entry separately as it affects thermal performance, but of course as far as liquid flow restriction goes the presence or absence of a backplate matters not. As expected, the serial flow design coupled with the thinner microchannels resulted in the Koolance VID-NX1080 having a higher liquid flow restriction relative to most others. The actual difference is not a lot in the grand scheme of things, however, with only the Alphacool NexXxos GPX being a real outlier.


Pages: 1 2 3 4 5 6 7