Navigate to:

Liquid Flow Restriction

I used a Swiftech MCP50X pump with a FrozenQ 400mL cylindrical reservoir. The pump was powered by a direct SATA connection to an EVGA 1300G2 PSU and was controlled by an Aquacomputer Aquaero 6 XT. There was a previously calibrated in-line flow meter and a Dwyer 490 Series 1 wet-wet manometer to measure the pressure drop of the component being tested. Every component was connected to the manometer by the way of 1/2″ x 3/4″ tubing, compression fittings, and two T-fittings. Lower is better here.

As expected, the split central flow design over the GPU core resulted in the Aqua Computer kryographics Pascal block being a high flow one relative to others. The actual difference is not a lot in the grand scheme of things, however, with only the Alphacool NexXxos GPX being a real outlier.


Pages: 1 2 3 4 5 6